Product Overview:
◎ 24VDC/110VAC/120V-240VAC 4-20Ma/0-10V 20N.m ISO5211 F03/04/05 Standard Connection Actuator;
◎ Installed With 3 Way 1/2" to 2" 1.5Mpa(217.5PSI) Stainless Steel Ball Valve Body;
◎ Menu Can Report Real-time Failure, including Stuck Or Other Reasons Which Lead Actuator Fail To Realize Valve On/off Integrally, and Output Failure Warning Signal;
◎ Built-in Motor Control Module, High-Performance Brushless Motor Frequency Speed Control Can Realize Accurate Positioning, Built-in Overload Protection of Internal Motor;
◎ 1.3" OLED Screen, No Visual Dead Angle, Highly Bright, Energy Saving And Eco-Friendly, Real Time To Show Valve Opening Angle And External Control Command Smart Ball Valve Actuator. Enter Sleeping State Automatically After About 5 Minutes, While It Could Prompt Location State And Its Control Command At Sleeping Time;
Product Detail:
◎ Valve Dimension: 1/2" to 2" BSPP or NPT Thread Available;
◎ Working Pressure: 217.5PSI(1.5Mpa);
◎ Actuator Rated Torque: 20N.m;
◎ Recomand Install Below 15N.m Valvd Body;
◎ Rated Voltage: 24VAC/DC, 110-230VAC, 50/60Hz;
◎ Control Signal: 4-20mA;
◎ Position Feedback:4-20mA;
◎ Position Accuracy: ±1%(Set By Software);
◎ Adopted High-Performance Brushless Motor, Overload Protection of Internal Motor;
◎ It can be used 20,000 times.*1;
◎ Connection Standard: ISO5211 F03/F04/F05;
Electrical Data:
◎ Rated Voltage: AC/DC24V (AC18-28V; DC18-32V);
◎ Power Consumption: 15W@Running, 0.5w@Holding;
◎ Peak Current: 950mA@5ms;
◎ Connecting Cable: 7*0.2mm² Cable, Voltage Withstand AC300V;
◎ Fuse: 2A;
Functional Data:
◎ Rated Torque: 20N.m;
◎ Angle Of Rotation: 90°±2°;
◎ Max Angle Of Rotation: 330°±5°;
◎ Manual Operation: ※ Matching Hexagon Wrench, Wsing At No Power;
◎ Running Time: About 10S(Per 90°);
◎ Continuous Running: Continuous Running;
◎ Sound Power Level: Max 50dB(A);
◎ Position Indicator: Mechanical and Screen;
Working Conditions:
◎ Electricity Safety Level: III Type (Safety Low Voltage);
◎ Inflaming Retarding Level: V0 UL94 Test Method;
◎ Enclosure: IP67 As Per En60529/GB4208-2008(All Directions); F Type Can Add Dehumidifying Heater ;
◎ Insulation Resistance: 100MΩ/500VDC ;
◎ Withstand Voltage: 500VAC, 1Min;
◎ Medium Temperature: ≤80° Can Install To Actuator Directly; ＞80° Need To Install Bracket or Heat Radiation Stand;
◎ Indoor or Outdoor; If Exposed To The Rain or Sunshine, Need To Install Protective Device For The Actuator;
◎ Not Explosion Proof Products, Do Not Use Them in Flammable and Explosive Environment;
◎ Ambient Temperature: -30℃ ~ 60℃;
◎ Non-operation Temperature: ≤-40℃ or ≥80℃;
